Cable Handling Equipment

CABLE PROTECTION AND EQUIPMENT

AERIAL CABLE ROLLER
Technical Data

Overall Dimensions Max Cable Diameter Weight Finish Product Code
W x H x L (mm) (kg)
(mm)
200 x 300 x 100 120 4.00 Black Powder Coating O10844
Description
• Aerial rollers are used for stringing bundled insulated conductors up to 120mm outside diameter in overhead applications.
• Rollers are suspended from a 760kg safety hook.
• Cable is fed through a side opening lockable latch.
• Rollers are available in polyurethane or alluminium.
CABLE PULLING SOCKS
Technical Data

Cable Diameter Weave Lattice Length Overall Length Breaking Strain Product Code
(mm) (mm) (mm) (ton)
6 - 13 Single 230 305 0.75 O10845
13 - 19 Single 355 430 1.00 O10846
19 - 25 Single 405 510 2.50 O10847
25 - 38 Single 455 610 3.50 O10848
38 - 50 Double 535 735 5.00 O10849
50 - 63 Double 610 865 5.00 O10850
63 - 89 Double 685 990 6.00 O10851
89 - 115 Double 685 990 7.00 O10852
115 - 130 Double 685 990 7.00 O10853
Description
• Cable pulling socks are also referred to as cable stockings or cable grips.
• This is the most efficient equipment to use when pulling cable in trenches, ducts or buildings.
• Socks are manufactured from high tensile galvanised steel and are available in single eye,
double eye or lace up derivatives.
• All socks can also be supplied in stainless steel or kevlar.
Note:
Aerial rollers are manufactured to order only. Minimum lead time of 14 working days is applicable. The following additional products are available on request:
• Swivels.
• Cable Pulling Socks.
• Cable Drum Jacks.
• Cable Drum Trailers.
• Cable Pulling Winches.
• Cable Laying Rollers.

CABLE LAYING ROLLERS

Technical Data

Overall Dimensions Maximum Cable Diameter Weight Finish Product Code
W x H x L Polyurethane Aluminium
(mm) (mm) (kg)
150 x 200 x 450 120 Outside Diameter 3,20 4,30 Black Powder Coating O10856


Description


• Roller frames can be electroplated or hot dipped galvanised.
• The standard finish is a black powder coated frame.
Note:
Rollers are available in polyurethane or aluminium. Minimum lead time of 14 working days is applicable. Rollers are manufactured to order only.
The following additional products are available on request:
• Swivels
• Cable Pulling Socks
• Cable Drum Jacks
• Cable Drum Trailers
• Cable Pulling Winches
CABLE DRUM JACKS

Screw Type


 		Capacity Drum Range Base Dimensions Closed Height Lift Weight Recommended Shaft Product Code
L x W
(kg) (mm) (mm) (mm) (kg)
5000 1.50m to 2.40m
Outside Diameter 		1000 x 400 720 450 40 60mm Outside Diameter x 2.00m Long O10854
Description
• Screw jacks are simple to use and the lowest cost options.
• They feature large stable bases, tough structural steel frames and large capacity iron shaft cups.
• This is a sturdy jack suitable for the toughest of site conditions.
• The range of cable drum jacks have been load tested on numerous occasions.

Hydraulic Type

Technical Data


Capacity Drum Range Base Dimensions Closed Height Lift Weight Recommended Shaft Product Code
L x W
(kg) (mm) (mm) (mm) (kg)
5000 0.75m to 2.40m
Outside Diameter 		1000 x 400 1200 300 80 60mm Outside Diameter x 2.00m Long O10855
Description
• Hydraulic jacks are fast and require less physical effort.
• The basic hydraulic unit's travel is extended to give a wide range of operating heights.
• The jacks are constructed of a high tensile fabricated frame with a multi-cup sub frame.
• This jack is suitable for all conditions.
• The range of cable drum jacks have been load tested on numerous occasions.
Note:
Should test certificates be required please indicate this at the time of order as it could affect lead times. The following additional products are available on request:
• Cable Laying Rollers.
• Cable Measuring Meters.
• Hand Operated Coiling Units.

HYDRAULIC CABLE SPIKING TOOL


The spiking tool is totally hydraulic in operation and does not require cartridges or a licence to operate. The product has been developed for use under all conditions and through extensive testing meets all required safety precautions.

The spiking tool is simple to operate and will easily penetrate every form of normally applied cable covering up to 110mm outside diameter. The design is such that it will provide years of trouble free usage and can be used vertically or horizontally.

In the event of accidental spiking into a live cable the chisel will be burned. Minimum repairs would be needed such as resharpening the chisel or replacing it immediately at low cost.

A number of municipalities are now insisting on the use of a spiking tool to finally determine if a cable is dead before cutting. The intelligent use of this unit can be a lifesaver and under all conditions will give definite manpower accident prevention.

The spiking tool and all its components comes packed in a powder coated case.
Technical Data

Weight Length Width Height Product Code
(kg) (mm) (mm) (mm)
28 600 400 200 O10857

CABLE PROTECTION SLABS

Used to protect electric cables, optic fibre cables, water pipes and other vulnerable underground sevices. Bury just on top of cable with selected material in-between or just under the topsoil layer.

Technical Data

Specifications Size Mass Product Code
W x H x L
Concrete: 25Mpa Semi-Dry Compacted Machine Made. (mm) (kg) H10186
300 x 60 x 1000 40
Finish: The Finish Is Press-Textured and Suitable for Underground Use.

Concrete: 25Mpa Semi-Dry Compacted Machine Made. 300 x 60 x 500 20 H10187
Finish: The Finish Is Press-Textured and Suitable for Underground Use.

FLEXIBLE CONDUIT AND ACCESSORIES

Kabelflex®


Protecting underground buried electrical & telecommunication cables:
• Kabelflex is a cable conduit (duct) used for protecting underground buried electrical and telecommunications cables.
• Double wall corrugated construction.
• Smooth bore ensures easy draw-in of cables.
• Manufactured from HDPE with high impact strength
• Available in 4 nominal diameters DN50,75,110 & 160mm.
• Available in 6m lengths (DN75,110 and 160).
• 50m coils (DN50,75 and 110) and 25m coils (DN160).
• Carries the SABS certification mark in respect of specification SANS IEC 6138624:2005.
• Manufactured in accordance with BS EN50086-2-2.
• Simple push fit couplings available with or without rubber sealing ring.
Type Outside Diameter Inside Diameter Standard Straight Length Minimum Bending Radius 6m length Product Code
(mm) (mm) (mm) (mm)

50 40 n/a n/a K6311
75 63 1400 250 K27
110 95 2500 350 K869
160 137 4000 450 K925

Kabelflex® Coils

Type Outside Diameter Inside Diameter Standard Length Coils Minimum Bending Radius Coils Product Code
(mm) (mm) (mm) (mm)

50 40 n/a n/a K413
75 63 1400 250 K916
110 95 2500 350 K870
160 137 4000 450 K926

FLEXIBLE CONDUIT AND ACCESSORIES

Couplings

Type Description Size Product Code
(mm)

Nextube Coupling 50 K887
Nextube Coupling & Seal 75 K111
Nextube Coupling & Seal 110 K104
Nextube Coupling & Seal 160 105

Bends

Type Description Size Product Code
(mm)

Nextube Bend 50 K428
Nextube Bend 75 K425
Nextube Bend 110 K65
Nextube Bend 160 K538